LXP-10A

The most important features:

• Measurement resolution:  0.001 lx (0.001 fc).
• High accuracy and fast response.
• Data-hold function for holding measuring values.
• Automatic zeroing.
• No need for correction factors calculating  for different light sources thanks to a very good fit spectral sensitivity guaranteeing the correct measurement of intensity of the illumination regardless of the nature of radiation.
• Peak-hold function for tracing the peak signal of light pulse with duration longer than 0.1 s and less than 1 s.
• Capable of selecting measuring mode in Lux or FC scale alternatively.
• Auto power off (5,10 or 15minutes) or disable AUTO power off.
• Maximum and minimum measurements.
• Relative reading.
• Easy to read large backlit display.
• USB output connect with PC.
• Data transmission via radio connection using an optional adapter OR-1.
• Six measurement ranges.
• Built-in memory –  999, with can be checked in the meter or PC.
• 16000 values records data logger (traceable only in PC).

Illuminance measurement probe LP-10A:

– display result in lx or fc (display result in fc with reduced resolution due to limitations of display)
– meter class A

Rated operational conditions:

• operating temperature: 0…50°C,
• operating humidity: 0% to 80% RH,
• storage temperature: -20…70°C,
• storage humidity: 0% to 70% RH.

Other technical data:

• display: 3¾ digit LCD with high speed 40 segment bargraph,
• over range indication: „0L” displayed,
• spectral response: CIE photopic (CIE human eye response curve),
• cosine response (f2’): ±3%,
• sampling rate: 1,3 times/sec,
• power supply: battery 9V or rechargeable battery 8,4 V,
• photo detector: one silicon photo diode and spectral response filter,
• memory: 999 results
• photo detector lead length: approx. 150cm,
• photo detector dimensions: 115 × 60 × 20mm,
• meter dimensions: 170 × 80 × 40mm,
• weight: 390g,
• data transmission: USB cable or wireless radio interface OR-1.