LXP-10B   

Catalog index: WMXXLXP10B

Light meters

 

Req quote

The new LXP digital light meter family allows for a very precise measurement of illuminanace. Thanks to very high resolution (resolution 0.01 lx ) allows for escape route emergency light measurement. All of three light meter have built-in memory for measurement result storing, and additional function making work much easier.

The most important features:

  • Measurement resolution 0.01 lx (0.001 fc).
  • High accuracy and fast response.
  • Data-hold function for holding measuring values.
  • Automatic zeroing.
  • No need for correction factors calculating  for different light sources thanks to a very good fit spectral sensitivity guaranteeing the correct measurement of intensity of the illumination regardless of the nature of radiation.
  • Peak-hold function for tracing the peak signal of light pulse with duration longer than 0.1 s and less than 1 s.
  • Capable of selecting measuring mode in Lux or FC scale alternatively.
  • Auto power off (5,10 or 15minutes) or disable AUTO power off.
  • Maximum and minimum measurements.
  • Relative reading.
  • Easy to read large backlit display
  • USB output connect with PC.
  • Data transmission via radio connection using an optional adapter OR-1.
  • Five measurement ranges.
  • Built-in memory – 999, with can be checked in the meter or PC.
  • 16000 values records data logger (traceable only in PC)

Illuminance measurement probe LP-10B:

Display
Range
[lx]		 Resolution
[lx]		 Spectral
uncertainty		 Accuracy
0…39,99 0,01 f1 < 6% ±(5 % + 5 digits)
40,0…399,9 0,1
400…3999 1
4,00 k…39,99 k 0,01 k
40,0 k…399,9 k 0,1 k

 

Display
Range
[fc]		 Resolution
[fc]		 Spectral
uncertainty		 Accuracy
0…3,999 0,001 f1 < 6% ±(5 % + 5 digits)
4,00…39,99 0,01
40,0…399,9 0,1
400…3999 1
4 k…39,99 k 0,01 k

– display result in lx or fc
– meter class B

Rated operational conditions:

  • operating temperature: 0…50°C,
  • operating humidity: 0% to 80% RH,
  • storage temperature: -20…70°C,
  • storage humidity: 0% to 70% RH.

Other technical data:

  • display: 3¾ digit LCD with high speed 40 segment bargraph,
  • over range indication: „0L” displayed,
  • spectral response: CIE photopic (CIE human eye response curve),
  • cosine response (f2’): ±3%,
  • sampling rate: 1,3 times/sec,
  • power supply: battery 9V or rechargeable battery 8,4 V,
  • photo detector: one silicon photo diode and spectral response filter,
  • memory: 999 results
  • photo detector lead length: approx. 150cm,
  • photo detector dimensions: 115 × 60 × 20mm,
  • meter dimensions: 170 × 80 × 40mm,
  • weight: 390g,
  • data transmission: USB cable or wireless radio interface OR-1.

Data Sheet                                      

User Manual                                   

Declarations of conformity          

Firmware for LXP-10