P-3  

P-3 can effectively check phase detection, and could be used for resistance measurement & circuit continuity tests.

P-3 Voltage and continuity tester functionality includes:

• AC/DC voltage measurement and indication
• Resistance measurement and circuit continuity testing
• Indication of phase rotation
• Single pole testing for phase detection
• RCD testing
• Identification and adjustment of phase

AC/DC voltage measurement and indication:

• on LED bargraf for values: 12, 24, 50, 120, 230, 400, 690 V (indication of voltage with and without batteries),
• display of measurement result in the LCD screen,
• determination of voltage: alternating or polarisation of constant voltage.

Resistance measurement and circuit continuity test:

• display of measurement result in the LCD screen,
• signaling for resistance <400 kΩ.

Indicator of phase rotation:

• indication of phase sequence for voltage >100 V.

Single pole test for phase detection:

• indication by means of touch electrode,
• optical and acoustic signaling for voltage >50 V.

RCD test:

• RCD test I_Δn ≤100 mA.

Identification and adjustment of phase:

• phase determination at given socket referring to the other one,
• possibility of phase determination at given socket with using additional transmitter – without time limit related to the synchronization of runs.

Terminals Ø2 mm/4 mm.

Illumination of measurement point.

DATA HOLD function, for holding measured values.

Meter meets the requirements of the standards EN 61010, IEC/EN 61243 – 3 EMC.

AC/DC voltage measurement

Resistance measurement

Data Sheet                                      

User Manual                                   

Declarations of conformity